Description D Link 4 Port Network Switch: The D-Link DES-1005P 5-Port 10/100 Switch, a variant of the D-Link 4-Port Network Switch, is a solution for businesses. This D Link 4 Port Network Switch DES-1005P has 4 PoE ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, providing up to 30 W on each PoE port with a total power budget of 60 W. The D Link 4 Port Network Switch features plug-and-play installation and requires no configuration, with auto-MDI/MDI-X support on all ports. D Link Network Switch 4 Port PoE: This eliminates the need for crossover cables when connecting to another switch or hub. The design of this D Link 4 Port Network Switch allows it to fit in most locations, and its fanless design ensures operation. It also features technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link status detection, and cable length detection. 5-Port Gigabit Switch with 4 PoE Ports: Additionally, this D Link 4 Port Network Switch’s Green Ethernet technology can detect the length of the network cables connected to the ports and provide only the right amount of energy. D-Link 4-port network switch priced at 151 A.E.D. D Link 4 Port Network Switch Specification: Specification Value 100Base-TX Interface 1 100Base-TX PoE Interface 4 Auto MDI/MDIX Yes Switching Capacity 1 Gbps Max. Packet Forwarding Rate 0.74 Mpps Store & Forwarding Yes Dimension 100 x 98 x 28 mm Weight 0.26 kg Operation Temperature 0 ~ 40 °C Storage Temperature -10 ~ 70 °C Storage Humidity 0% ~ 95% RH Operation Humidity 0% ~ 95% RH Operating Altitude 2000m Maximum Power Consumption (PoE on) 63.26W Maximum Power Consumption (PoE off) 3.61W Standby Power Consumption 0.68W Maximum Heat Dissipation 2.3203 BTU/hr Acoustic 0 dB MTBF 311,081 hours Flash Memory Size 1KB Packet Buffer Size 64KB FAN Fanless Power Input DC: 53.5V 1.2A Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By Cable Length Yes Maximum PoE Budget 60W MAC AddressTable Size 2K 802.3x Flow Control Yes Number of Queues 4 Surge/Lightning Protection (AC Power Inet) 2Kv (Line to earth) Surge/Lightning Protection (All Ethernet Ports) 1Kv Two Rate Three Color Marker (trTCM) Yes Troubleshooting Tips and Solutions: D-Link DGS-1210 Switch is failing and causing packet loss Solution: Reboot the switch. This will fix most minor issues. If the problem persists, try the next solution. Update the switch’s firmware to the latest version. D-Link releases firmware updates regularly to fix known issues and improve performance. Reset the switch to its factory default settings. This will erase all custom settings and restore the switch to its original configuration. If the problem persists, try the next solution. Contact D-Link support for further assistance. D-Link switch slowing down when connected to another intelligent switch Solution: Try connecting the switch to a different port on the other switch. Try using a different type of cable to connect the two switches. Try disabling some of the switch’s features, such as jumbo frames or flow control. Contact D-Link support for further assistance. D-Link switch losing its configuration on power off Solution: Make sure that the switch is properly connected to a power source. Try using a different power adapter. Try resetting the switch to its factory default settings. This will erase all custom settings and restore the switch to its original configuration. If the problem persists, try the next solution. Contact D-Link support for further assistance.
