Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2)

Ubiquiti FiberPoE Gen2 Optical Data Transport for Outdoor PoE Devices (F-POE-G2) The white F-POE-G2 FiberPoE GEN2 from Ubiquiti Networks provides Gigabit bidirectional data transport between Ethernet and fiber optic cables. Additionally, it injects DC power to the Ethernet cable for passive PoE. This device can be used as a fiber to Ethernet converter, or as a fiber bridge with an additional FiberPoE GEN2 (available separately). This device is equipped with a Gb/s SFP port, a DC terminal block, a DC RJ45 port, and a 1000M PoE port. It provides surge and ESD/EMP protection. Provides reliable Gigabit PoE runs over long distances Data and power are transported on separate cables to improve data integrity and allow long cable runs Two FiberPoE GEN2 devices can be used as a fiber bridge, enabling users to utilize them as a fiber optic data link for protection from EMI events that can damage equipment or cause signal problems 24/50V passive PoE transport Integrated fiber cable strain relief provides additional protection and a cleaner installation Interface Connections: SFP Port: 1 Gbps DC Terminal Block: 2-wire DC input DC RJ45 Port: For DC injection Ethernet PoE Port: 1000 Mbps (Note: 10/100 Mbps Ethernet is not supported) Power Specifications: Power Method: DC Terminal Block: 2-wire, 24VDC or 50VDC DC In RJ45 Port: 2-Pair (Pins 4, 5 ; 7, 8-): 24VDC Input 4-Pair: 24VDC or 50VDC Input Passthrough PoE RJ45 Port: 2-Pair (Pins 4, 5 ; 7, 8-): 24VDC Input 4-Pair: 24VDC or 50VDC Input PoE Passthrough PoE Output: PoE RJ45 Port: 2-Pair (Pins 4, 5 ; 7, 8-): 24VDC 4-Pair: 24VDC or 50VDC DC Output: Terminal Block: 2-wire (24VDC or 50VDC) Input DC Voltage Range: 16 to 57V Typical Power Consumption: 1.5W Protection Features: Surge Protection: Built-in high-current Gas Discharge Tube (GDT) for DC Terminal Block and PoE Port ESD/EMP Protection: ±24kV Contact/Air for Ethernet Environmental Specifications: Operating Temperature: -40 to 60°C (-40 to 140°F) Operating Humidity: 10 to 95% Noncondensing Certifications: CE FCC IC